2008 Mitsubishi Crane Truck – Stock Number 916

A well set up 4 x 2 line servicing truck.

  • This sound, heavy-duty truck runs a 207kw/275hp motor, 9sp gearbox, has full air braking including a full air ‘maxi’ handbrake, and a strong6.3 ton front axle.
  • The all-steel deck is 4.2 metres long x 2.35 metres wide and is fitted with neat alloy drop sides.
  • There are numerous tool/storage boxed both above and below the deck including one with drawers.
  • The 2005 rear mounted Palfinger PK15002 crane has a max. lift at 2m of 5,750kg and extends to 12.4 metres hydraulically where it will lift 760kg.
  • By sliding out the manual extension a max of 14.6 metres can be reached.
  • The crane is also fitted with auxiliary hydraulics which in this case run an auger drill and a 500mm drill bit.
  • These, along with the extension hoses, are all contained on the headboard.
  • On the left-hand side is a roller rack for containing 3 ladders, on the right is a pole rack, at the rear a vice, and at the front is an alloy water tank for washing up.

A truck full of features benefitting the lines services industry and well suited to the rigours of crane work.

Enquire Now